Wherever they end up!
Track & Confirm
in a Biomek™ 2000 Labware holder.
|This is a Low profile .375" Thermal device for
labware. It works in conjunction with a refrigerated recirculating bath or
heated recirculator for elevated temperatures. It operates
with various types of labware. It works great directly with
flat bottom plates and performs well with round and V bottom
plates. Other adapters and custom labware adapters are available. This device can be used on the
Multipette96™ , Multimek™, Biomek™2000 and other Liquid handlers.
This device can heat or cool labware -10°C to 60°C (regulations
limit this value, tested at -15°C to 95°C ) It has a slightly
smaller foot print than a titer plate to allow for insulation or a
condensate wrap. includes definition sheet and installation
instructions,10' of 1/4 tubing and fittings for its use. An appropriate
recirculator with a range of -20°C to 100°C range will provide full
capability. up to 4 can be ganged together from single 6L refrigerated
recirculator @ 4ºC In stock
*Receive a $200.00 discount when purchased
along with any ACME-Automation thermal adapter.